Guided configuration workflows

Runbooks

Build an ordered change plan with pre-checks, configuration, verification, and a matched rollback path.

Recipes: 8
Vendors: 5
Stages: 4

Library

Choose a workflow

Resiliency

Resilient gateway with HSRP

Build and validate a tracked first-hop gateway with controlled preemption.

Moderate risk15–25 min

⌘

Topology source

No saved topology is available in this browser.

Edit topology

Use values from

Start with a topology

Add devices and connections in the workspace, then return here to generate coordinated plans.

Open topology workspace →

Set the parameters

The command plan updates as you type.

VendorThis workflow currently targets one platform family.Layer 3 interfaceReplace the example with the planned production value.Device IP addressReplace the example with the planned production value.Subnet maskReplace the example with the planned production value.HSRP groupReplace the example with the planned production value.Virtual gatewayReplace the example with the planned production value.PriorityReplace the example with the planned production value.Tracking objectReplace the example with the planned production value.

Follow the change sequence

0 of 4 stages marked complete

1Pre-change checksConfirm the interface, duplicate-address risk, tracking state, and existing HSRP groups.5 commands

show running-config interface Vlan10
show ip interface brief | include Vlan10
show standby brief
show track 1
ping 10.10.10.1

2Apply the gateway configurationConfigure addressing, HSRP election behavior, and object tracking.9 commands

configure terminal
interface Vlan10
 ip address 10.10.10.2 255.255.255.0
 standby 10 ip 10.10.10.1
 standby 10 priority 110
 standby 10 preempt delay minimum 30
 standby 10 track 1 decrement 20
 no shutdown
end

3Verify state and failover readinessConfirm the role, peer, virtual address, and tracked-object influence.5 commands

show standby Vlan10 brief
show standby Vlan10
show track 1
ping 10.10.10.1 source 10.10.10.2
show logging | include STANDBY|TRACK

4Remove the HSRP groupRemove the HSRP configuration while retaining the physical interface address.5 commands

configure terminal
interface Vlan10
 no standby 10
end
show standby Vlan10 brief